hello.

         I create a ova file from my ESXi 5.0.0 with ovftool 2.1.0-467744, then I deploy this ova file into ESXi 5.0.0 is success and work well.

But I can't deploy the same ova file into VMWare Player with ovftool 2.1.0-467744 installed. Why?

         Anybody has any idea? Thanks.

Best Regards,

I'm experiencing a coredump when attempting to deploy an OVA into vCenter 5.0.0.  I have downloaded the OVA to the Windows 7 PC locally and have run the ovftool from that path as follows:

ovftool --X:logToConsole=true --X:logLevel="verbose" --name=ovf-test --datastore=datastore-local-113 --network=VLAN-603 MVF-ver-2_OVF10.ova "vi://Administrator:**********@10.45.99.10/MitelDesignCenter/host/VLabCluster-03 (Intel G6, stand-alone)/10.45.12.113"

The verbose output looks like this:

2012-01-13T11:45:23.595-05:00 [04492 verbose 'Default'] Subscribing to signal: 2 (SIGINT)

When I try to export one of my VMs using File/Export/Export OVF Template....it crashes vSphere with a nice assertion window.

To see what the cause of this is, I decided to try using ovftool 2.1.0 on Linux to export the VM instead, to see what happens (like does it crash ovftool?).

I got stuck though because when I log into the vCenter I have to specify a domain\username format and I can't figure out how to pass this to ovftool in a way that doesn't cause errors.

For example, I tried things like this:

# ovftool  vi://myvcenter.domain.com/DataCenterName/vm/

Username:  MYDOMAIN\Administrator

Password: whatever

Didn't work, I don't think it likes the backslash.

So I tried stuffing it in a variable:

# DF="MYDOMAIN\Administrator"

# ovftool  vi://"$DF"@myvcenter.domain.com/DataCenterName/vm/

Error: Curl error: Couldn't connect to server

Anyone have any ideas?

Thanks,

CJ

I'm getting wildly different results while importing large OVF file into vCloud Director 1.0.1 via the ovftool than when performing the upload of the same OVF via the native JAva tool within vCloud Director itself. AS long as the file transfer compeltes through the vCD Java tool, the file is importing into vCenter correctly, and then being correctly registered within vCD.

The OVF I'm working with is 68.2 GB in size.

Below is a sanatized version of my command line and the output from the tool:

ovftool --net:"dvportgroup-48=company-Services_Internal" E:\OlioWebtest\oliowebtest.ovf "vcloud://user:password@testvcd1.company.com:443/?org=company_Services&vapp=OlioWebTest&vdc=company_Services_ALLO_vDC01&catalog=test"
Opening OVF source: E:\OlioWebtest\oliowebtest.ovf
The manifest validates
Warning: File is not referred in the manifest: oliowebtest.ovf
Opening vCloud target: vcloud://user@testvcd1.company.com:443/
Waiting for task on server .done
Deploying to vCloud: vcloud://user@testvcd1.company.com:443/
Disk Transfer Completed

Error: Invalid response from server
Completed with errors

Looking in the vCD GUI logs for the organization, I see the descriptor being processed, and the process for finalizing the upload completing, but the vApp is never added to the catalog. If I look in vCenter, I can find the VM on a valdi datastore for the org vDC and the correct resource pool in the proper state for a catalog vApp. The error "Error: Invalid response from server" is displayed immediately upon completion of the data transfer.

If I move the VM to the root of the datacenter, I can import the VM as a vApp and copy it to the caalog with no issue.

I tested with a much smaller OVF (1.3 GB), and received exactly the behavior I expected.

ovftool --net:"none=company-Services_Internal" E:\suse\descriptor.ovf "vcloud://user:password@testvcd1.company.com:443/?org=company_Services&vapp=SUSE32&vdc=company_Services_ALLO_vDC01&catalog=test"
Opening OVF source: E:\suse\descriptor.ovf
Warning: No manifest file
Opening vCloud target: vcloud://user@testvcd1.company.com:443/
Waiting for task on server .done
Deploying to vCloud: vcloud://user@testvcd1.company.com:443/
Disk Transfer Completed

Waiting for task on server ...................done
Waiting for task on server .......................................done
Waiting for task on server ..done
Completed successfully

Looking at the succesful transfer, I see an additonal action logged in the GUI logs for the organization. After the finalization record, there is a "Create virtual application" event logged on the smaller transfer that is never logged on the larger transfer.

The only item I can think of from a vCloud Director standpoint is that that vCD logon sesion timeout has expired on the large transfer long before the additional tasks are issued to vCD resulting in the invalid response. Is this the case, or is something else going on?

When looking at the vcloud-container-info.log file on the cells doing the processing for the succesful imports, I see a whole string of commands being executed in the current logged on user context.

I'm trying to create an additional property in my VM that I build with VMware Studio so that I can use OVFTool to pass a value for the property when I deploy the VM to a vCenter.

The property looks like that shown in red.  But when I invoke OVFTool to give a value to this property, what am I supposed to be using? 

Something like this I can't get to work:

    ovftool  <...>  --prop.ConfigurationManagementServer.My_VM_Name= 10.1.2.3   <..>

Thanks for any hints,

CJ

        <Section xsi:type="vadk:IpAssignmentSection_Type">

                <Info>Supported IP assignment schemes</Info>

                <vmw:IpAssignmentSection ovf:required="false" vmw:protocols="IPv4,IPv6" vmw:schemes="">

                        <Info>Supported IP assignment schemes</Info>

                </vmw:IpAssignmentSection>

        </Section>

        <Section xsi:type="vadk:PropertySection_Type">

                <Info/>

                <Property ovf:key="ConfigurationManagementServer" ovf:type="string" ovf:userConfigurable="true" ovf:value="puppet" ovf:qualifiers="MinLen(0),MaxLen(65535)">

                        <Label>Configuration Management Server (Optional)</Label>

                        <Description>Your configuration management server&apos;s fully-qualified name (e.g. config.avamar.com ). Blank if none.</Description>

                </Property>

        </Section>

        <Section xsi:type="vadk:AnyOVFSection_Type">

                <Info>

            Unknown OVF elements in this element will be passed directly

            to the OVF output descriptor without interpretation

        </Info>

        </Section>

        <Section xsi:type="vadk:UpdateSection_Type">

                <Info/>

                <vadk:Repository vadk:url="" vadk:username="" vadk:password="" vadk:passwordFormat="base64"/>

Hi everybody,


I'd like to change the hardware version during an export using ovftool. Is there a way to specify it ?
I've seen the "--maxVirtualHardwareVersion" but I'm unable to understand how to use it. I can't find any documentation on the supported syntax anywhere.


Any advice ?


Jean-Baptiste

I an trying to inport an OVA file in to a precreated folder named test under a datacenter.  I have created a fold under vCenterServer/datacenter/host/test and running the below command.

ovftool --powerOn C:\Images\cur\NAMEHERE.ova vi://Administrator:PASSWORD@192.168.1.100/vCenterServer/datacenter/host/test

When i run this command i get the below output

Opening OVA source: C:\Images\cur\NAMEHERE.ova

Error: Found wrong kind of object (Folder)

I have also tried the same but importing in to a VM folder vCenterServer/datacenter/VM/tes, this gives the same error as above.

What am i doing wrong?

Hi I'm wondering if there is an automation tool/command(s) that will allow us (team of developers) to import/use a .iso file that contains 64bit OS and pass it through VMware ESXi or Server and then export it to OVF/OVA?

Is it possible? Can it be done?

Your answers will be very apreciated, many thanks!

It appears that ovftool 3.0.1 has an issue while specifying the target datastore when importing an OVF when the VI is a vCenter 5.0 server with ESX 5.0 Update 1 hosts that have a large number of Datastores.  The cluster where this problem occurs has 148 Datastores.

Some datastores work, most don't.  This is a new problem since ovftool 2.0.1 worked fine when this cluster was at ESX 4.0 Update 3.

An example statement that will cause the problem (with all names replaced with "test" names):

"C:\Program Files\VMware\VMware OVF Tool\ovftool.exe" --acceptAllEulas --name="TestVM" --datastore="TestDatastore" --network=TestNetwork --vmFolder="TestFolder" http://192.168.0.1/public/ovfs/testvm.ovf vi://"username:password"@vcenter.test.com/"Data Center"/host/"HA and DRS"/Resources/"Test Resource Pool"

HI,

I'm trying to create an OVF using ovftool 3.0.1. When I issue the ovftool command from the command line I get:

Error: cURL error: Couldn't connect to server
Completed with errors

I used the following command:

/usr/bin/ovftool vi://username:password@XX.XX.XX.XX/datacenter/vm/folder/vmname /destination

I can issue the command as above without the vmname to see if I can access Vsphere and to make sure I have a valid source locator.  The command is successful and returns a list of VMs I can use. When I add the VM name to the source locator path, I get the above error. The VM is pysically about 14GB in size (that is the space alloacted).

I can use the same command to another Vpshere server and I'm successful in creating the OVF. Which leads me to think that it might be a configuration issue with this Vsphere server?

What sorts of issues can lead to the above error?

Thanks,

Fernando

Hi,

i have some OVA files that when i try to deploy them, shows the following error :

Unable to access file :

C:\user\Administrator\Desktop\Backup\new-ova\ubuntu.18-file1.iso

End Of OVA file reached while looking for : ubuntu.18-file1.iso

Image may be NSFW.
Clik here to view.

I use VMWare ESXi 5.5

how can i resolved this issue ?

I try to deploy a OVA into a vCenter 5.5, using OVFTool with the following command:

/usr/bin/ovftool --powerOn --acceptAllEulas --noSSLVerify --skipManifestCheck --allowAllExtraConfig --X:enableHiddenProperties --deploymentOption=${VMNAME_DEPLOYMENT_SIZE} "--net:Network 1=${VMNAME_PORTGROUP}" --datastore=${VMNAME_DATASTORE} --diskMode=${VMNAME_DISK_TYPE} --name=${VMNAME_DISPLAY_NAME} --prop:vami.DNS.APPLIANCE=${VMNAME_DNS} --prop:vami.gateway.APPLIANCE=${VMNAME_GATEWAY} --prop:vami.ip0.APPLIANCE=${VMNAME_IPADDRESS} --prop:vami.netmask0.APPLIANCE=${VMNAME_NETMASK} --prop:guestinfo.cis.appliance.ssh.enabled=${ENABLE_SSH} ${VMNAME_OVA} vi:/${VCENTER_USERNAME}:${VCENTER_PASSWORD}@${VCENTER_HOSTNAME}/?dns=${ESXI_HOSTNAME}

and I got this error:

Opening VMX target: vi:/administrator*************
Error: OVF Package is not supported by target:
 - Line 768: Unsupported virtual hardware device 'VirtualSCSI'.
Warning:
 - ExtraConfig options exists in source.
Completed with errors

The OVF file has the following settings:

            <Item>
     LINE768-->   <rasd:Address xmlns:rasd="http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/CIM_ResourceAllocationSettingData">0</rasd:Address>
                <rasd:ElementName xmlns:rasd="http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/CIM_ResourceAllocationSettingData">SCSI Controller 0 - pvscsi</rasd:ElementName>
                <rasd:InstanceID xmlns:rasd="http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/CIM_ResourceAllocationSettingData">4</rasd:InstanceID>
                <rasd:ResourceSubType>virtualSCSI</rasd:ResourceSubType>
            <rasd:ResourceType>6</rasd:ResourceType>
              </Item>

and also :

<System>
        <vssd:ElementName>Virtual Hardware Family</vssd:ElementName>
        <vssd:InstanceID>0</vssd:InstanceID>
<vssd:VirtualSystemType>vmx-07 vmx-08 vmx-09</vssd:VirtualSystemType>
      </System>

Any advice on how to fix this issue and deploy the OVA?

Thanks.

I'm trying to export a VM using ovftool on linux.

 ovftool --X:logFile=upload1.log --X:logLevel=verbose --noSSLVerify vi://[user]:[pass]@[ESXi IP]:[port]/my_datacenter/vm/my_vm_folder/my_vm_name /tmp/test.OVF 

and i get the following error in the log:

2016-11-11T11:40:30.287+02:00 verbose -[7F5C76E3F7C0] [Originator@6876 sub=Default] Getting version of the VI host : [ESXi IP]

2016-11-11T11:40:30.287+02:00 verbose -[7F5C76E3F7C0] [Originator@6876 sub=Default] Initializing new curl session

2016-11-11T11:40:30.288+02:00 verbose -[7F5C76E3F7C0] [Originator@6876 sub=Default] WebRequest set basic http authorization, username : [user]

2016-11-11T11:40:30.288+02:00 verbose -[7F5C76E3F7C0] [Originator@6876 sub=Default] Getting http page: https://[ESXi IP]/sdk/vimServiceVersions.xml

2016-11-11T11:40:30.299+02:00 verbose -[7F5C6F1CF700] [Originator@6876 sub=Default] Curl_perform error code 35 (SSL connect error)

2016-11-11T11:40:30.299+02:00 verbose -[7F5C76E3F7C0] [Originator@6876 sub=Default] CURL error buffer: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number

2016-11-11T11:40:30.299+02:00 verbose -[7F5C76E3F7C0] [Originator@6876 sub=Default] Curl session torn down

2016-11-11T11:40:30.300+02:00 verbose -[7F5C76E3F7C0] [Originator@6876 sub=Default] Backtrace:

-->

--> [backtrace begin] product: VMware Workstation, version: e.x.p, build: build-2459827, tag: -

--> backtrace[00] libvmacore.so[0x003D9C74]: Vmacore::System::Stacktrace::CaptureWork(unsigned int)

--> backtrace[01] libvmacore.so[0x001DBF37]: Vmacore::System::SystemFactoryImpl::CreateQuickBacktrace(Vmacore::Ref<Vmacore::System::Backtrace>&)

--> backtrace[02] libvmacore.so[0x0018481D]: Vmacore::Throwable::Throwable(std::string const&)

--> backtrace[03] ovftool.bin[0x0020DFB3]

--> backtrace[04] ovftool.bin[0x00248E5D]

--> backtrace[05] ovftool.bin[0x0024C5C9]

--> backtrace[06] ovftool.bin[0x00295BC4]

--> backtrace[07] ovftool.bin[0x0029714C]

--> backtrace[08] ovftool.bin[0x00299744]

--> backtrace[09] ovftool.bin[0x001EC2B4]

--> backtrace[10] ovftool.bin[0x001EEB04]

--> backtrace[11] libc.so.6[0x00021F45]

--> backtrace[12] ovftool.bin[0x001626B9]

--> [backtrace end]

-->

You'll note that the command is run with --noSSLVerify.

So I checked the SSL versions on both the client and the ESX server using:

openssl ciphers -v | awk '{print $2}' | sort | uniq 

and both returned:

SSLv3

TLSv1.2

no difference between the two...
looked around for this curl error and while it is fairly well known I haven't seen a solution applicable to my situation.

Any ideas?

4.2.0 is bundled into the current build of Fusion10:

ovftool --version

VMware ovftool 4.2.0 (build-6230482)

This version has a busted --allowAllExtraConfig flag, so some VMs will not export to OVA, instead you get a slew of errors like this one:

- Line -1: Unsupported value 'disk.EnableUUID' for attribute 'key' on element 'ExtraConfig'.

Hi,

is it possible to include the nvram-file in the OVF-File oder how to tranport BIOS-Settings with OVF.

regards.

Hans-Peter

TAM, EMEA-Central

VMware

Hello all,

I am having a problem with the ovftool.

Here's what i did.

1)I created a VM running CentOS.

2)These are the 3 files that i got.

Test.vmx

Test.vmdk (Descriptor File)

# Disk DescriptorFile

version=1

CID=5046e880

parentCID=ffffffff

createType="vmfsPreallocated"

# Extent description

RW 83886080 VMFS "Test-flat.vmdk" 0

# The Disk Data Base

#DDB

ddb.virtualHWVersion = "4"

ddb.geometry.cylinders = "83220"

ddb.geometry.heads = "16"

ddb.geometry.sectors = "63"

ddb.adapterType = "lsilogic"

Test-flat.vmdk

3) This is the command that i ran

ovftool "Test.vmx" "Test_New.ova"

Please help!

Thank you

Hi All,

I am trying to convert vmdk file to ovf format using command line. I am using the below command:

# ovftool my_vm.vmdk new.ovf

   Opening OVF source: my_vmdk.vmdk

   Error: Failed to open OVF descriptor

   Completed with errors

Not sure whats wrong in this command. Please help!

Thanks!

I am trying to import OVF with custom propery set and getting folling error with vmware ovf tool. Any idea on how to resolve this issue?

Error:

- Line 107: Unsupported element 'Property'

I am attempting to perform and document a roundtrip Export and Import using ovftool.

I performed the export as follows:

bowser:/tmp/ovfTool # mount 10.68.x.xx:/export/images /mnt/ovfExport

bowser:/tmp/ovfTool # mkdir /mnt/ovfExport/ovfs

bowser:/tmp/ovfTool # mkdir /mnt/ovfExport/ovfs/wario-sles11-sp1-x8664

bowser:/tmp/ovfTool # ovftool vi://bluoma:******@helios.blue.roguewave.com/Corvallis/vm/Build\ Server/sles11-sp1-x8664/wario /mnt/ovfExport/ovfs/wario-sles11-sp1-x8664/wario.ovf

Opening VI source: vi://bluoma@helios.blue.roguewave.com:443/Corvallis/vm/Build%20Server/sles11-sp1-x8664/wario
Opening OVF target: /mnt/ovfExport/ovfs/wario-sles11-sp1-x8664/wario.ovf
Writing OVF package: /mnt/ovfExport/ovfs/wario-sles11-sp1-x8664/wario.ovf
Disk Transfer Completed

Completed successfully

Now I am attempting to import/deploy the ovf:

Any ideas why the SHA1 digest did not verify?

vCenter:   4.1.0

ESXi host:  4.1.0

Thanks,

Bryan

Hi,

trying to convert a "SUSEstudio" generated vmdk/vmx to our VI.

I have:

SLE_11.1JeOSPHR.x86_64-0.0.3.vmdk

SLE_11.1JeOSPHR.x86_64-0.0.3.vmx

christian@chrisw:/srv/ISO/JeOS/SLE_11.1JeOSPHR-0.0.3&gt; ovftool SLE_11.1JeOSPHR.x86_64-0.0.3.vmx

Opening VMX source: SLE_11.1JeOSPHR.x86_64-0.0.3.vmx

OVF version:   1.0

Name:          SLE_11.1JeOSPHR.x86_64-0.0.3

Download Size:     Unknown

Deployment Sizes:

  Flat disks:      4.04 GB

  Sparse disks:   Unknown

Networks:

  Name:        bridged

  Description: The bridged network

Virtual Hardware:

  Family:       vmx-04

  Disk Types:   SCSI-lsilogic

Completed successfully

#####

When I try to convert it to vi (to correct datastore) I'm getting the mentioned error:

so what is the correct syntax ??

christian@chrisw:~/srv/ISO/JeOS/SLE_11.1JeOSPHR-0.0.3&gt; ovftool -ds=CX300-OTC-02 -dm=thick SLE_11.1JeOSPHR.x86_64-0.0.3.vmx vi://i000156@vc.icw.int/DC%20OTC

Opening VMX source: SLE_11.1JeOSPHR.x86_64-0.0.3.vmx

Please enter login information for target vi://vc.icw.int/

Username: i000156

Password: ********

Error: Locator does not refer to an object: vi://i000156@vc.icw.int/DC%20OTC

DataCenter="DC OTC"

DataSource="CX300-OTC-2"

THX

Chris